20 Up-And-Comers To Follow In The Sliding Patio Doors Repair Industry

20 Up-And-Comers To Follow In The Sliding Patio Doors Repair Industry

Sliding Patio Doors Repair

It is possible for sliding patio doors to be difficult to open and close. This could be due to a variety of problems, such as dirty tracks or a misaligned slider.

Clean the track and lubricating the rollers. You can also utilize the adjustment holes on the lower part of the movable panel to adjust the alignment of your rollers.

Tracks that are damaged or dirty

A sliding door that does not slide as it should can be caused by an unclean or damaged track. Over time dirt, grit and even rust may accumulate making the track unable to move smoothly. A mild detergent and a brush will suffice. This job should be done regularly to ensure a smooth operation and avoid costly repairs in the future.

A door that is leaky is another common issue that requires prompt attention to avoid water damage, mold growth and structural deterioration. Most often, the issue is due to worn weather stripping and doors that are not aligned properly, which can be corrected by replacing the weather stripping and aligning the door.

Another issue that is common and can be solved with a bit of DIY work is when rollers jump off the track. Find a friend to assist you in this endeavor because the door may be heavy. To move the rollers around, stand inside the house and lean one of the panels towards you. To prevent the panel from falling, put it on sawhorses when it's been removed from the bottom track. Then loosen the screws that hold each roller in place and remove them with a screwdriver. Then, you can clean any dirt stuck between the tracks and the wheel. Then, clean each wheel with denatured alcohol and the rag, then move the wheels and attach them to their tracks.

If a portion of the track is bent, it might be possible to straighten it by using a rubber mallet or block of wood. However in the event that the bent portion is near the hinges and has the potential to cause more damage, you'll be better off calling in a professional for safety reasons.

Rollers that are misaligned

If your sliding door is sliding poorly it's most likely due to the roller wheels aren't aligned with the track. The wheels may be dirty or rusted, and their bearings are worn down. This friction causes the door to become snagged and grind when opened or closed. This can also result in squeaking sounds.

Fortunately, this is an easy fix. The wheels are mounted on a bracket which can be adjusted, so you don't need to take off the door. Find the holes for adjustment (usually on the opposite side of the frame) and make use of a screwdriver to turn the screws that control the wheels. A clockwise rotation of the screw raises the wheel while a counterclockwise turn lowers it. Continue to adjust until the door moves smoothly and quietly when open or closed.

It is crucial to adjust the wheel prior to adjusting your latch. The latch hooks need to align with the strike plate (the opening into which the latch locks) in order for the lock to work correctly. If you do not do this, the latch may accidentally open or shut even when you're not in the room.

Patio doors that slide are a major investment, and making sure they are functioning correctly helps keep your family safe and secure. You can avoid future expensive repairs by fixing common issues like faulty tracks, rollers, and handles. Contact our team for more information about patio doors. We can assist you in keeping your sliding patio doors in top condition by assessing the repair needs. Our professionals can also assist with any replacement parts you may need.

The door frame is loose or damaged

Sliding patio doors are a great option for any home and offer an attractive and convenient alternative to hinged or swing-open doors for patios. Like all hardware items sliding patio doors may develop problems with time. Many of these issues are easy to fix by using a bit of DIY expertise.

A common issue that affects sliding patio doors is gaps in the frame. It can be caused by a number reasons, including tracks or rollers that are not aligned properly, a damaged door or track, or a bent door frame. In most cases, the problem is easily solved by taking the doors out and reattaching the track. This should be done with extreme caution to avoid damage the frame or track.

In some cases it may be required for the entire track to be replaced. This can be accomplished easily with the universal kit that is available in most major hardware stores. These kits are simple to install and will have your door working properly again in no-time.

Regularly inspect your sliding door's hardware and frame for signs of wear, such as loose bolts or screws. These are usually tightened with a screwdriver or wrench, making this an easy and efficient DIY patio door maintenance process. It is also crucial to lubricate the tracks and rollers of your patio door to ensure smooth operation and to keep them from wearing out prematurely.

For many homeowners the patio doors are the main access to their backyard and outdoor living space. They need to to function correctly to ensure the safety of their home and provide security. By taking the time to follow these easy maintenance tips homeowners can extend the lifespan of their sliding patio doors and reduce costly repairs or replacements.

Faulty Handle

Sliding patio door are a great way to get into your home and get access to your backyard, however they can become difficult to operate when they are not aligned properly. A faulty handle can also cause the door to become stuck or difficult to open and close. The good news is that fixing the handle that is loose is a fairly simple job that can be completed at home.



In most cases, a handle that is loose is the result of screws working their way out of the backplate. To resolve this issue just tighten the two screws on the inside of the handle using a screwdriver. If you notice that the handle remains loose, it may be a sign that the threads have damaged and must be replaced.

A broken latch could be the cause. It is more likely that the latch will break if it's made of metal instead of plastic. You can try applying lubrication to the latch in case it isn't engaging or turning. If this does not work, you may need to replace the lock.

If the handle is damaged or broken, it may be difficult to use. If this happens, you will need to replace the handle with one that is in line with the style and design of your patio doors.

Feldco can help you restore your patio doors to their former splendor, no matter if they are new or outdated. We have a variety of high-quality patio doors in different sizes and styles. Contact  repair patio door lock  to learn more about our doors! We are proud to serve homeowners throughout Southern California, including Ventura County, Orange County & San Diego County.

Weatherstripping that isn't working properly

It's time to replace your weather stripping if notice light coming from windows and doors, or notice a draft pushing at the window or door. These strips create a secure seal that blocks unwanted air, pests, or water from getting inside your home. They also help keep your heated and conditioned air in, saving you money on energy bills year-round.

Depending on the condition of your weather stripping, it could have deflated and lost its bouncy positive seal. It is easy to identify this by running a dollar bill under the seal at the top and bottom of the jamb as well as door frame where they overlap. If the dollar bill slides easily between the seal and door with ease then it's time to replace the weatherstripping.

It's tempting to remove just the worn area of weather stripping and then replace it, but this will result in cracks on the sides of the new piece and could cause issues with the seal in the future. It's far more effective to replace the entire stripping to ensure that you are able to rest that your door is sealed once again.

Follow our DIY guide to weather stripping and install the correct material for your sliding patio door and frame to ensure a secure and lasting seal. It's a great way to fix your door and save on your energy bill Don't wait until it's too late. Your wallet and home will thank you.